Parts; Manual Charging - h.koenig SWR28 Bedienungsanleitung

Parts :

Auto-charging electrode
Ground detection sensor
Battery cover
Side cleaning brush
Ground detection sensor
Right wheel
Installation of docking station and charging for the cleaner :
Automatic recharging :
1. Install the docking station on the flat ground firmly and
against the vertical wall.
2. No obstacle or hollow areas 3m away from the docking station in
the front and 0.5m on the right and left.
3. The cleaner cannot search the docking station for charging if
the infrared signal transmitting window of the recharger is
covered.
4. Connect the output terminal of the adaptor with DC socket of
the docking station .
: Please place the power cord of the adaptor along the wall,
or it may interfere with the brush or wheels.

Manual charging :

1. You can use the adaptor or docking station of the
cleaner to charge for the main body directly.
2. Connect the output terminal of the adaptor
with DC socket of the main body while
using the adapter for charging..
3. Press Docking in the remote control if you want to charge for the main
body, the cleaner will search the docking station for charging within
available scope automatically.
Handle
Front bumper
Infrared signal receiver
Front wheel
Power switch
DC socket
Dustbin key
Function key
Display screen
Sensor window
UV sterilizing lamp
Left wheel
Floor brush
Main brush
Trainling bar
Mop pad
Dusbin
Air outlet window
3m
0.5m
Caution !
0.5m