h.koenig SWR28 Bedienungsanleitung Seite 8

6. Reverse the dustbin, tear out the mop, release the trailing bar and then unplug the right and left fasteners
on the bottom of the dustbin. All parts should be assembled as before disassembly.
: Don't use the mop and trailing bar on the carpet or uneven ground.
Cleaning of dustbin and blower :
1. First dump the dust, and the, and then
clean it with dust brush.
2. Pop up the blower, and then clean the
air inlet/outlet with dust brush.
3. Don't clean the blower in water !
4. Pop up the blower, take out the filter,
and then clean the dustbin in water.
5. Clean the filter by hairdryer or
dust brush.
6. After cleaning, you can assemble it
firmly as before the disassembly.
Assembly & disassembly and cleaning of main brush, floor brush, side brush :
Assembly & disassembly of mid cleaning brush and floor brush :
1. Force the locking bar forward and raise the cover by right
thumb, and then raise rod of the mid cleaning brush by
your left hand.
2. Take out the main brush and floor brush.
3. Insert the main brush and floor brush into the holes before
closing the cover in assembly.