CAMPAGNOLO SUPER RECORD Bedienungsanleitung Seite 31

The threaded holes for the pedals located
on the hand crank are type 9/16'' x 20 TPI.
The thread of the left hand crank is left-
handed (Fig. 2), therefore turn the pivot of
the pedal anticlockwise to fit the pedal,
whereas the thread of the right hand crank
is right-handed (Fig. 3), therefore turn the
pivot of the pedal clockwise to fit the pedal.
Observe the tightening torque indicated
by the pedal manufacturer.
The chainrings of the crankset can be repla-
ced by selecting combinations of chainrings
that differ from the original.
The available Campagnolo chainring pairs
are: 50-34, 52-36, 53-39.
Contact your local mechanic to have the
chainrings replaced.
For maximum compatibility and efficiency,
use only original Campagnolo components.
ENGLISH
2
3
31