Troubleshooting - Klarstein Cubix Anleitung

TROUBLESHOOTING

Problem Possible causes
Power lamp off,
No power supply
does not work
Power lamp on, No water in water tank
no mist outlet
Security switch is too loose
with fan
New unit
Abnormal mist
smell
Dirty water or water sitting
too long
Power lamp
Too much water in the water
on, unit doesn't
basin
work
Too much scale in the water
basin
Mist fog is too
low
Water is too dirty or water
left in the tank too long
Resonance in water tank
when water is too low
Abnormal noise
Unit is on a unstable surface
Mist fog coming
There are gaps between the
out from around
nozzle and water tank
nozzle
Solution
Connect power supply, switch
on
Fill water tank with water
Tighten the switch
Remove water tank, open
cover, let it stand 12 hours in
a cool place
Clean water tank, fill with
fresh water
Remove some water from the
water basin, tightly close the
cover of water tank
Clean transducer
Clean water tank, replace
with fresh, clear water
Fill water tank with water
Move the unit to a stable flat
surface
Immerse the nozzle in water
for a time, and then attach it
to the socket on water tank
EN
25