Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Sinio DTR 6110 S / 6111 S CI
LNB Settings
LNB Type
Low A
Low B
Select Satellites
Edit Satellite
Name
DiSEqC Switch
62
GRUNDIG Service
ADJUSTING THE SATELLITE RECEIVER
6
Select the »Low A « row using the »
using the »OK« button, enter the oscillator frequency as 5 digits using the
numeric buttons
Select the »High A « row using the »
7
using the »OK« button, enter the oscillator frequency as 5 digits using the
4
numeric buttons
0 9750 MHz
High A
10600 MHz
0 9750 MHz
High B
1
10600 MHz
Select the »Low B « row using the »
8
using the »OK« button, enter the oscillator frequency as 5 digits using the
numeric buttons
9
Select the »High B « row using the »
Exit
Back
using the »OK« button, enter the oscillator frequency as 5 digits using the
numeric buttons
10
Select the »Select Satellites« row using the »
then confirm with »OK« .
– The »Assign Satellite« menu appears on the picture screen.
11
Select the desired satellite using the »
confirm with »OK«.
– The »Edit Satellite« menu appears on the picture screen.
EutelSat 13° O
B
12
Activate the highlighted »DiSEqC switch« row using the »OK« button.
– A dialogue box appears on the picture screen.
13
Select the appropriate satellite assignment using the
confirm with »OK«.
Exit
Back
Press »Z« to return to the »Assign Satellite« menu, or
14
press »
COMMON INTERFACE
The satellite receiver's interface for the reception of
scrambled satellite services
The Common Interface (C I) is an interface for digital satellite receivers (also
Only with the
called SET-TOP boxes):
This interface serves for connecting a CA module (CA = Conditional Access)
DTR 6111 S CI
available for various scrambling systems.
Scrambled satellite services can only be received with the help of a CA module
which complies with the scrambling system, in connection with a corresponding
smart card.
The smart cards comprise the data for the access authorization to the
scrambled services of the provider from which the card has been purchased.
Please contact the Pay-TV provider you are interested in for more information.
With the satellite receiver DTR 6111 S CI in connection with CA modules, you can
receive all free and certain scrambled satellite services.
The satellite receiver DTR 6111 S CI is provided with a Common Interface
compartment for two CA modules in its front panel.
Insert the smart cards which you have purchased from a pay TV provider into
the CA modules to get access to the desired scrambled satellite services.
Important!
Only you are responsible for the use of the smart card.
When not used, keep your smart card and your PIN code in a safe place.
Observe also the user instructions of the Pay-TV provider.
___________________________________
,
, P+, P-
»1 ... 0
«, and finally confirm with »OK«.
,
, P+, P-
»1 ... 0
«, and finally confirm with »OK«.
,
, P+, P-
»1 ... 0
«, and finally confirm with »OK«.
,
, P+, P-
»1 ... 0
«, and finally confirm with »OK«.
,
, P+, P-
,
, P+, P-
»P+, P-
« to end the settings.
Menu
_________________________________
Allgemeiner Teil / General Section
« buttons, activate it
« buttons, activate it
« buttons, activate it
« buttons, activate it
« buttons, and
« buttons then
« buttons then
61
1 - 17
Werbung
Inhaltsverzeichnis
