Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Allgemeiner Teil / General Section
TV
Now
w
20:04
Next
Radio
Now
w
14:34
Next
16
Main Menu
1 Service Table
2 Search
3 System Setup
4 Timer
5 Over-Air Download
6 CI Setup
* Only with the Sinio DTR 6111 S CI
18
1 - 14
SWITCHING ON, SELECTING SERVICES
Switching the satellite receiver on and off
1
Switch the satellite receiver on by pressing any key on the remote control.
ON: in the display appear at first 4 horizontal lines »
the number of the selected service position.
To switch the satellite receiver back in standby, use the » « button on the
remote control or on the satellite receiver.
OFF/standby: in the display the red indicator is lit.
112. Das Erste
1/1
Note:
Tagesschau
Each time when switching on and when changing the service position, an
20:00
20:15
8
7
Heimatmelodie
on-screen display briefly gives you the following information: current TV,
radio or favourite service, service position number, station name,
6. Bayern 4 Klassik
1/1
programme with digital sound service, number of the Favourites list, title of
Schöne Stimmen
the current programme, current time, start and end time of the current pro-
8
14:05
15:00
7
gramme, and title of the following programme.
B 4-Panorama
Selecting service positions
1
Repeatedly press the
control to select the service positions step by step.
2
Keep the
pressed to scroll the service positions at high speed.
3
Enter multi-position service position numbers within 3 seconds using the
1
0
numeric buttons
position directly using the
4
Call up the desired »Channel Lists TV, Radio or Favourites User 1 to 4«
using the yellow »
service using the
button.
Go back to the last selected TV or Radio service by pressing the »
5
button.
THE ON-SCREEN MENU GUIDE
The user-friendly menu guide
This satellite receiver is provided with a very comprehensive, user-friendly menu
guide. On-screen menus provide the dialogue between the user and the
receiver.
The »Main Menu« is the control centre of your satellite receiver.
*
1
Press the »
screen.
– The Main Menu shows the next possible operating steps.
Exit
The receiver will respond to many of the functions selected via the remote control
by displaying info menus and on-screen symbol lines. In these lines, the remote
control buttons are shown which lead to the possible settings.
1
0
1 ... 0
numeric buttons for directly selecting the submenus and the corres-
ponding settings.
P+, P-
for moving the cursor up/down and selecting settings.
OK
For calling up and confirming the selected function.
for moving the cursor to the left/right, for paging the menus
forward/backward.
Z
back to last menu. Changed settings are automatically saved.
exit all menus with automatic switching to the last active function
Menu
(e.g. back to current TV programme). Changed settings are automa-
tically saved.
In the following submenus you can carry out many settings and obtain infor-
mation about the operation of the satellite receiver.
Just try it out, you can't do anything wrong.
- - - -
»P+, P-
« buttons on the satellite receiver or the remote
»P+, P-
« buttons on the satellite receiver or on the remote control
»1...0
« on the remote control then call up the service
»OK
button.
«
@
« button on the remote control, select the desired
»P+,
P« buttons, and finally call it up with the »OK«
« button to display the »Main Menu« on the picture
Menu
Sinio DTR 6110 S / 6111 S CI
_______
«, and then
E
«
_________________________
GRUNDIG Service
Werbung
Inhaltsverzeichnis
