Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Allgemeiner Teil / General Section
AV Setup
TV
Picture Format
Letterbox
AV Setup
TV
Picture Format
Letterbox
LNB Settings
LNB Type
Low A
Low B
Select Satellites
60
1 - 16
BASIC SETTINGS
4
Select the setting »RGB« or »CVBS« required for your TV set using the
»P+, P-
CVBS
Select the »Picture Format« menu row using the
5
4:3
Off
confirm with »OK«.
Note:
TV programmes are boradcast with the 4:3 or 16:9 picture format.
Exit
Back
The satellite receiver recognizes automatically these formats and processes
them accordingly.
6
Select the »4 : 3« or »Auto « setting for your TV set using the
buttons, then confirm with »OK«.
Note:
If you select the »Auto « setting, the »Letterbox « row disapears.
The TV set (16: 9) is automatically provided with the correct picture
format.
CVBS
7
If applicable, select the »Letterbox « row using the
4:3
On
confirm with »OK«.
8
Select »On« or »Off« using the
Exit
Back
9
Press »Z« to return to the »System Setup« menu, or
press »
ADJUSTING THE SATELLITE RECEIVER
Adjusting the satellite receiver to the satellite antenna
and the LNB configuration
In order to adjust the satellite receiver in an optimum way to the different antenna
systems, four LNB configurations are available.
Note:
Your antenna technician or specialized dealer which has installed your
antenna system will be glad to provide you with detailed information about
all settings required.
Important!
For every setting you want to use you must enter the oscillator frequencies
(low and high) of the LNBs into the »LNB setup« menu.
The number of the possible oscillator frequencies depends on the selected
LNB configuration.
To ensure the reception of services of different satellites, different switching sig-
nals are emitted when selecting another satellite service in order to select the
required LNB along with its frequency in a unique way.
1
Call up the »Main Menu« on the picture screen using the »
2
Select the »System Setup« row using the
confirm with »OK«.
4
Select the »LNB Settings« row using the
3
High A
0 9750 MHz
10600 MHz
with »OK«.
0 9750 MHz
High B
10600 MHz
4
Select the »LNB Type « row using the
with »OK«.
5
Select the appropriate LNB Type, depending on the satellite antenna and the
Exit
Back
LNB, LNB Type 4 in the example, using the »
confirm with »OK«.
________________________________________________________________________
« buttons, then confirm with »OK«.
»P+, P-
»P+, P-
»P+, P-
« buttons, then confirm with »OK«.
« to end the settings.
Menu
»P+, P-
»P+, P-
« buttons, and then confirm
»P+, P-
« buttons, and then confirm
P+, P-
Sinio DTR 6110 S / 6111 S CI
« buttons, then
»P+, P-
«
« buttons, then
21
___________
« button.
Menu
« buttons, and then
« buttons, and then
GRUNDIG Service
Werbung
Inhaltsverzeichnis
