Technical Specifications - Velleman VTBAL7 Bedienungsanleitung

is displayed. Now, place a calibration weight onto the platform and wait for CAL F to display. A
display showing CAL E means an error has occurred. Repeat the calibration operation.
Weighing
Place the scales on a stable and perfectly horizontal surface. Press ON/TARE to switch on the
scales and wait for the scales to initialize. The scales are ready to be used when the display
shows 0.0. Choose your weighing unit (gram, ounce, pennyweight, troy ounce, grains or carat)
with CAL/MODE. Carefully place the object onto the platform and read the value from the display.
Lo- -: low batteries.
O - ld: the scales are overloaded.

3. Technical Specifications

Power Supply
Capacity
Resolution
Tare Range
Operating Temperature
Dimensions
Use this device with original accessories only. Velleman nv cannot be held responsible in
the event of damage or injury resulted from (incorrect) use of this device. For more info
concerning this product, please visit our website www.velleman.eu. The information in this
manual is subject to change without prior notice.
VTBAL7
2 x 3V C2032 lithium battery (incl.)
200g
0.1g
0g ~ 200g
0°C ~ +40°C
110 x 65 x 20mm
3 VELLEMAN