Scanning For Stations - Noxon NOVA Bedienungsanleitung

NOXON NOVA
5 .6 DAB
DAB mode recives DAB/DAB+ digital radio and dsiplay information about station, stream and track
playing .
• Available stations change from time to time .
• If reception was not good for the original scan, this may result in an empty or incomplete list
of available stations .
• If you have poor reception of some stations (burbling), you may wish to list only stations with
good signal strength .
To start a scan manually, choose Full scan . To scan only stations with good signal strength, select
Local scan .
5 .6 .2 Presets
To store a DAB preset, press and hold
Select one of the 5 presets to save the currently playing station .
To select a preset, press
a preset station is playing, it shows Pn (P1, P2 etc) at the bottom right of the screen .
"1" to "0" on the remote control are for the use of preset station 1-5 .
58
5 .6 .1
The first time you select DAB radio mode, or if the station
list is empty, NOXON NOVA automatically performs a full
scan to see what stations are available . You may also need
to start a scan manually to update the list of stations for one
of the following reasons:
Once the scan is complete, the radio shows a list of
available stations . To remove stations that are listed but not
unavailable, choose Prune invalid .
Turn the navigate reel to view a list of stations and press
to select . Once selected, the station plays and the screen
shows information about station, track or show as broad-
cast .
PRESET until the display shows the Save preset screen .
PRESET briefly, then select one of the listed preset stations. When

Scanning for stations