Control Panel; Connection; Operation; Receiving Dab+/Dab Stations - Noxon dRadio 100 Handbuch

dRadio 100

Control Panel

10. Scan starts scanning available stations
11. DAB/FM switches from DAB+/DAB to FM mode and vice versa
12. Info (i) shows additional information (if broadcasted by station)
13. Mute reduces the volume to 0
14. On/Off activates or deactivates your dRadio 100 (Standby)
15. Memory saves and recalls your favourite stations

Connection

The connection of your dRadio 100 is really easy:
• Start by connecting the provided mains cable with the mains connector (6) on the unit
and a power outlet.
• Proceed by inserting the provided telescopic antenna into its dedicated connector (9)
and extend it to its full length.
• Alternatively, you can also use a DAB active antenna or a signal coming from your
rooftop antenna. In this case, please use the provided adapter.
• Set the mains switch (5) into the "I" position. In order to activate or deactivate the dRa-
dio 100, just press the On/Off button (14) on the control panel located on top of the unit.

Operation

Receiving DAB+/DAB stations

Switch into DAB+/DAB mode
The upper left corner of the display shows the mode your dRadio 100 is currently set to
(FM, DAB or Menu). If it is not set to DAB+/DAB already, just press the DAB/FM button
(11) on the control panel once.
16