Maintenance And Environmental Protection; Service Instructions - MEISTER CRAFT JIG BULL MPS 710 E-P Betriebsanleitung Und Sicherheitshinweise

MCP-5453310-Bedien-0409.qxd
Sawing
Do not exert undue pressure on the piece
to be cut so as to avoid overheating and
destruction of the saw blade. Place thin
cutting workpieces on an additional sheet
to suppress vibrations and improve
cutting results.
Interior sawing
If you have to cut into the center of the
workpiece, and it is not possible to drill
a hole: Set oscillation to I, loosen the
sawing shoe, push back all the way, and
lock in place. Carefully let the saw blade
slide up to the workpiece with the
machine in tilted position and switched
on. As soon as you have sawn through
the workpiece, continue to work with
the machine in the normal position.
10 – Maintenance and
environmental
protection
Clear the housing, the ventilation
openings, and the moving parts from
dust regularly. If necessary, wipe with a
moist cloth with the power plug pulled.
Oil the guide roller for the saw blade
lightly from time to time.
CAUTION! Electrical and battery
operated units that no longer work
should not be disposed of in the
household waste! They are to be
collected separately, in
accordance with the
2001/96/EC directive for
the disposal of electrical
and electronic waste, and
sent for proper and
environmentally-friendly
recycling.
09.04.2009 10:57 Uhr
Please discard power tools no longer
usable at a local collection point.
Collection and disposal of packaging
materials separately by types complying
with local rules and regulations. For
details, please contact your municipal
authority concerned.
11 – Service instructions
• Store the machine, operating
instructions and where necessary the
accessories in the original packaging.
In this way you will always have all
the information and parts ready to
hand.
• MeisterCRAFT devices are to a large
extent maintenancefree, a damp cloth
being sufficient to clean the casing.
Do not drop electrical machines in
water. Please note additional hints
given in the operating instructions.
• MeisterCRAFT devices are subject to
stringent quality control. If however a
functional fault shoult occur, send the
device to our servicing address. The
repairs will be carried out in a short
time.
• A brief description of the defect speeds
up the faulttracing and repair time. If
within the guarantee period, please
enclose the guarantee document and
the proof of purchase.
• In so far as a repair under guarantee
is not concerned, we will charge the
repair costs to your account.
PLEASE NOTE! Opening of the
device invalidates the guarantee
claim!
Seite 47
47