Open Window Function; Screen Brightness Function; Programming The Kyros Towel Rail - Rointe KYROS Bedienungsanleitung

1.8. "Open Window" function
This function is activated when the probe detects a reduction of 4º in respect of the set
temperature during 30 minutes.
On activation, the following image will appear on the towel rail display for 5 seconds:
When the "Open window" function is activated, the following screen will appear showing that
the anti-frost mode is activated:
This function will be active for 2 hours. If the button is pushed during this period the towel
rail will switch off. Pushing the button again will switch on the towel rail without the "Open
window" function being switched on.

1.9. Screen brightness function

You can change the brightness of the screen by pushing the button for 3 seconds when the
product is in manual mode. Entering this mode you will see the following screen:
In ON mode you can increase or decrease the brightness of the screen by using the and
buttons.
You can change the "Standby" mode brightness by pushing the button to move the frame to the
"STAND-BY" position. You can then adjust the brightness by pushing the same and keys.
To finish the programming wait for 10 seconds without pressing any buttons.

2. PROGRAMMING THE KYROS TOWEL RAIL

IMPORTANT NOTICE: PLEASE READ THE INSTRUCTIONS FULLY BEFORE STARTING THE
PROGRAMMING TO ENSURE A GOOD UNDERSTANDING OF THE PROCESS.
7