Technical Data - Caframo BDC1850 Bedienungsanleitung

Technical Data

Voltage
Installation Category
(in accordance with IEC664)
Maximum Current Draw
Maximum Output Power
Speed Readout
Speed Readout Accuracy
Torque Readout Accuracy
Maximum Operating Noise
Motor Type
Drive
Hollow Drive Shaft
Chuck Guard
Support Rod
Chuck
Weight
Seals
Protection measures: 0
Class Protection device
No additional protection.
0
The operating conditions should be monitored at regular intervals.
120 volts @ 60 Hz 220-240 volts @ 50/60 Hz
II
3 amps
1/5 hp, 150 watts
LCD 4 digit display
+/- 1 rpm or +/- 1% of reading
+/- 12 Ncm (1 in-lb) or +/- 5% of reading
70 dB (A) at 1 meter
Brushless DC
2 stage transmission
Nitrated P .30 with 10 mm (0.39 in) diameter
bore for stirring impellers.
13 mm (0.51 in) outside diameter for drive
chuck.
Length
Diameter
Molded clear chemical resistant polyurethane.
12.7 mm (0.5 in) dia
140 mm (5.25 in) long
3 prong stainless steel. Maximum opening
10 mm (0.39 in) diameter.
5 kg (11 lbs)
Butyl Rubber
Recommended use
Used only on equipment where failure
of the controls does not represent a
hazard.
5
II
3 amps
67 mm, (2.64 in)
54 mm, (2.13 in)