Device Elements; Start Up; Dry Vacuum Cleaning - Husqvarna DC 1400 Bedienungsanleitung

Device elements

1 Electrodes
2 Suction hose
3 Air outlet, working air
4 Suction head lock
5 Air inlet, motor cooling air
6 Suction head
7 Dirt receptacle
8 Steering roller bow
9 Steering roller
10 Floor nozzle
11 Suction tube
12 Suction support
13 Cable hook
14 Filter cover
15 Carrying handle
16 Push handle
17 Bender
18 Rotary switch for suction output (min-
max)
19 Indicator lamp
20 Socket
21 Automatic filter dedusting
22 Main switch
23 Flat fold filter (PES)
24 Filter dedusting
25 Floor nozzle holder
26 Drain hose
27 Holder for suction pipes
28 Holder for crevice nozzle
29 Power cord
30 Nameplate

Start up

ATTENTION
The flat pleated filter must always be in
place while vacuuming.
Anti-static system
Only for appliances with built-in socket:
Static charge is deflected by providing
earthing to the connection nozzles. This
prevents the formation of sparks and cur-
rent shocks due to attachments (option)
with electrical conductivity.
14

Dry vacuum cleaning

– When vacuuming up fine dust, a dis-
posal bag or a membrane filter (optional
accessory) can additionally be used.
Installing the dust disposal bag
Illustration
Note: The opening of the disposal bag
must be pulled all the way over the ledge of
the suction support.
 Release and remove the suction head.
 Attach disposal bag.
 Pull disposal bag over the container.
 Insert and lock the suction head.
Install membrane filter
Note: During operation without a disposal
bag a membrane filter can be used.
Illustration
 Release and remove the suction head.
 Pull the membrane filter (option) over
the container edge.
 Insert and lock the suction head.
Wet vacuum cleaning
Inserting the rubber lips
Illustration
 Remove the brush strips.
 Install the rubber lips.
Note: The structured side of the rubber lips
must point outwards.
Removing the dust disposal bag
Illustration
 Release and remove the suction head.
 Put the disposal bag over.
 Pull the opening of the disposal bag out
toward the back over the suction sup-
port.
 Tightly seal the disposal bag with clo-
sure strips underneath the opening.
 Remove disposal bag.
 Insert and lock the suction head.
– To suck wet dirt, always remove the dis-
posal bag.
– It is recommended to use a special filter
bag (wet) (optional accessory).
– 2
EN