Environment Concerns - Electrolux EHD90341P Benutzerinformation

22 electrolux
Problem
The residual heat indicator does
not come on.
A sound operates and appliance
starts and stops again. After 5
seconds one more sound oper-
ates.
Heat setting alternates
comes on
and number come on.
comes on
If you tried the above solutions and cannot
repair the problem, speak to your dealer or
the Customer Care Department. Give the da-
ta from the rating plate, three-digit-letter
code for the glass ceramic (it is in the cor-
ner of the cooking surface) and an error mes-
sage that comes on.

ENVIRONMENT CONCERNS

The symbol on the product or on its
packaging indicates that this product may
not be treated as household waste. Instead
it should be taken to the appropriate
collection point for the recycling of electrical
and electronic equipment. By ensuring this
product is disposed of correctly, you will
help prevent potential negative
consequences for the environment and
human health, which could otherwise be
caused by inappropriate waste handling of
this product. For more detailed information
Possible cause and remedy
The cooking zone is not hot because it operated only for a short
time. If the cooking zone is supposed to be hot, speak to the Af-
ter Sales Service.
You covered . Uncover the sensor field.
The Power management is active. See the section Power man-
agement.
• No cookware on the cooking zone. Put cookware on the cook-
ing zone.
• Not correct cookware. Use the correct cookware.
• The diameter of the bottom of the cookware is too small for
the cooking zone. Move cookware to a smaller cooking zone.
• The automatic switch-off operates. Stop the appliance and
start it again.
• Overheating protection for the cooking zone operates. Switch
off the cooking zone. Switch on the cooking zone again.
There is an error in the appliance.
Disconnect the appliance from the electrical supply for some
time. Disconnect the fuse from the electrical system of the
house. Connect again. If
sales service.
There is an error in the appliance, because a cookware boils dry
or you use not correct cookware. Overheating protection for the
cooking zone operates. The automatic switch-off operates.
Switch off the appliance. Remove the hot cookware. After approx-
imately 30 seconds switch on the cooking zone again.
should disappear, residual heat indicator can stay. Cool down
the cookware and check it with the section "Cookware for the in-
duction cooking zone".
If you operated the appliance incorrectly,
the servicing by a customer service techni-
cian or dealer will not be free of charge,
even during the warranty period. The instruc-
tions about the customer service and condi-
tions of guarantee are in the guarantee book-
let.
about recycling of this product, please
contact your local council, your household
waste disposal service or the shop where
you purchased the product.
comes on again, speak to the after