Kerbl 1085 Bedienungsanweisung Seite 28

How the StableCam works
1. The camera films the animal and transmits the audio/video signal via the antenna-cable to the antenna.
4. The AVLink transmits wireless the signal to the LCD-Monitor (up to a distance of 100 m without wall etc. – every
5. It can be used up to 2 cameras with 1 AVLink
Two antennas pointing at each other give you a wireless range of 1200 meters with a clear line of sight.
walls etc must be inbetween the 2 antennas and they must be pointed exactly to each other – otherwise no signal will
be received.. The included antenna cable allows the camera to be placed up to 25 m from the transmitting antenna
Camera: Setup in the barn
The included antenna cable will allow you to set up the camera
meters away from wall socket.
Choose the right place for your camera in order to monitor the
area properly. You can test easily the covered area: fix the small
charger. Choose the right channel on the LCD monitor by pres-
sing the channel button and check the picture.
First of all check if the battery is inserted
correctly in the LCD monitor and charge it
until the red light disappears at the monitor
channel switching button (after approx.
for approx. 2 h
You need the charged monitor for testing of
the camera!
28
12V