Hochfrequenz-analyser
für frequenzen von 2,4 ghz bis 10 ghz (20 Seiten)
Inhaltszusammenfassung für Gigahertz Solutions HF58B
Seite 1
GIGAHERTZ SOLUTIONS Example (HF58B, HF58B-r, HF59B, HFW59B, HFE59B: Attenuator connected and the "Adapter" switch set for "Attenuator -20dB): Displayed value: True (precise) value: 100 µW/m² 100 µW/m² HFE35C, HFW35C: The value from the display must be multiplied with a factor of 100 to get the real...
Seite 2
Sollen hohe Feldstärken gemessen werden, macht das Dämpfungsglied die HF- LUTIONS SOLUTIONS SOLUTIONS SOLUTIONS SOLUTIONS Messgeräte HFE35C, HFW35C, HF58B, HF58B-r, HF59B, HFW59B und HFE59B IGAHERTZ GIGAHERTZ GIGAHERTZ GIGAHERTZ GIGAHER (hier incl.) um den Faktor 100 unempfindlicher. Es wird benötigt, wenn bei den...
GIGAHERTZ SOLUTIONS Example (HF58B, HF58B-r, HF59B, HFW59B, HFE59B: Attenuator connected and the "Adapter" switch set for "Attenuator -20dB): Displayed value: True (precise) value: 100 µW/m² 100 µW/m² HFE35C, HFW35C: The value from the display must be multiplied with a factor of 100 to get the real...
Seite 4
Sollen hohe Feldstärken gemessen werden, macht das Dämpfungsglied die HF- LUTIONS SOLUTIONS SOLUTIONS SOLUTIONS SOLUTIONS Messgeräte HFE35C, HFW35C, HF58B, HF58B-r, HF59B, HFW59B und HFE59B IGAHERTZ GIGAHERTZ GIGAHERTZ GIGAHERTZ GIGAHER (hier incl.) um den Faktor 100 unempfindlicher. Es wird benötigt, wenn bei den...
GIGAHERTZ SOLUTIONS Beispiel (HF58B, HF58B-r, HF59B, HFW59B und HFE59B (Schalter “Pegelanpas- sung”: -20dB): Abgelesener Wert: Realer Wert : 100 µW/m² 100 µW/m² HFE35C und HFW35C: Der auf dem Display angezeigte Wert muss mit dem Faktor 100 multipliziert wer- den um den realen Feldstärkewert zu erhalten.
Seite 6
HF-Analyzer to accurately display the higher signal strength. It is compatible with the following HF Analyzers HFE35C, HFW35C, HF58B, HF58B-r, HF59B, HFW59B and HFE59B (here incl.). This attenuator is recommended to be used on the least sensitive measurement range.
Seite 7
GIGAHERTZ SOLUTIONS Beispiel (HF58B, HF58B-r, HF59B, HFW59B und HFE59B (Schalter “Pegelanpas- sung”: -20dB): Abgelesener Wert: Realer Wert : 100 µW/m² 100 µW/m² HFE35C und HFW35C: Der auf dem Display angezeigte Wert muss mit dem Faktor 100 multipliziert wer- den um den realen Feldstärkewert zu erhalten.
Seite 8
HF-Analyzer to accurately display the higher signal strength. It is compatible with the following HF Analyzers HFE35C, HFW35C, HF58B, HF58B-r, HF59B, HFW59B and HFE59B (here incl.). This attenuator is recommended to be used on the least sensitive measurement range.