Loading The Tool - Stinger CS150ST Bedienungsanleitung

www.stingerworld.com

LOADING THE TOOL

FOR USE WITH 7/8"/22.1mm, 1-1/4"/31.75mm, or 1-1/2"/38.1mm STINGER STAPLEPAC® CAP STAPLES OR
STINGER COLLATED PLASTIC CAPS WITH 15mm AERFAST
•! Disconnect air.
Magazine Cover by pushing the
green Cover Release Tab and
lifting.
•! Close the Magazine Cover.
5
Open the •! Place cap reel in Magazine. Make
sure the front end of the cap coil is
placed over the cap guide area of
the Magazine. Insert lead cap into
the Feed Chute.
•! Pull back the Staple Follower until
the Latch catches.
•! Release the Catch Button.
into air source.
use.
® STAPLES ONLY
•! Slide caps along the Feed Chute
with fingers until they engage the
Cap Feeder. Pull the Cap Feeder
back and release to advance caps
until the first cap is under the Nose
of the tool.
•! Place staples in Staple Track.
Plug
Tool is ready to
CS150ST Cap Stapler CS150ST