Important Information - Stinger CS150ST Bedienungsanleitung

www.stingerworld.com

IMPORTANT INFORMATION

PERSONAL SAFETY ITEMS
•! Do not use tool prior to reading the Owner's Manual. Keep this manual available for future
reference.
•! Always wear eye protection that conforms to ANSI requirements (Z87.1) and provides
protection against flying particles both from the front and side. Eye protection should be
worn by the operator and by others in the work area. Eye protection is required to protect
against flying fasteners and debris that could possibly cause severe eye injury.
•! The employer is responsible to enforce the use of eye protection equipment by the tool
operator and all other personnel in the work area.
•! To prevent accidental injuries:
–! Handle the tool with care
–! Always assume that the tool contains fasteners
–! Always disconnect the air hose from the STINGER CS150ST when:
•! loading staples and/or caps
•! performing inspection, maintenance or repair
•! clearing a staple or collated cap jam
•! the tool is not in use
•! leaving the work area
• moving the STINGER CS150ST to another work location
•! handing the STINGER CS150ST to another person
•! storing the tool
–! Never point the tool toward yourself or anyone else
–! Never engage in horseplay
– Never hold or carry the tool with a finger on the trigger
–! Never place a hand or any other part of the body in the fastener discharge area of
the tool while the air supply is connected
1
CS150ST Cap Stapler CS150ST
!