How To Use - babymoov A002026 Gebrauchsanleitung

• Leave the bottle warmer to cool for about 15 minutes before
using it again. Never touch the inside of the tank while the
appliance is in use, or immediately after use.
• Always unplug the appliance before cleaning or filling and after
each use.
• Do not leave the power cable at the edge of a table or work-
surface. Do not place it on a hot surface. Do not leave the
power cable dangling where a child could reach it.
a. Graduated measure
b. Tank
Points to respect for trouble-free use:
- Always check that the bottle is slightly open.
- Always remove the lid from the jar.
- Optimum heating will be guaranteed provided operation is not interrupted.
- Use tap water only, with no added product.
NB: always use the large basket to heat bottles and jars
By using the amounts of water indicated in the tables below, a baby bottle or jar will be heated to 30 °C / 33 °C.
The quantities given are an indication only; if you think the result is too hot or not hot enough for your baby, don't hesitate to reduce
or increase the quantities of water.
Take care: the quantities of water given correspond to a polycarbonate bottle without a removable base.
1. Fill the bottle warmer measure (a) with water
up to the mark indicated.
2. Pour the water into the bottle warmer tank
(b).
3. Put the bottle in the bottle warmer tank (b).
4. If the bottle is too large, remove
the adaptor ring (c).
5. Put the jar in its basket (e) then put the basket
in the bottle warmer tank (b).
6. Press the "On" button (d) to start the appliance.
7. The lamp (f) will turn red to show that the
appliance is working. Remark: the appliance
can't be stopped using the "On" button. It will
turn off automatically to tell you that the bottle
or jar is ready.
8. Remove the bottle immediately using tongs
or a cloth because it will be hot. Shake the
bottle to mix the milk. Pour a drop of milk on
the back of your hand to check its
temperature. For a jar, mix the contents and
check it is not too hot.
8

HOW TO USE

c. Adaptor ring
d. "On" switch
Amount of milk
in the bottle
60 ml
90 ml
120 ml
150 ml
180 ml
210 ml
240 ml
270 ml
300 ml
330 ml
120 g
200 g
250 g
STEAM BABY BOTTLE WARMER • Instruction Manual
• In the interests of safety, only use Babymoov accessories and
spare parts and never dismantle the appliance.
• Avoid using your appliance if it is not working properly or if it
is damaged. If this happens, contact the Babymoov after-
sales service.
Quantity of water to put
in the measure, when
the bottle has been
prepared with water at
room temperature.
Quantity of water
Jar to put in the measure
for one jar.
e. Basket for jars
f. Indicator lamp
Quantity of water
to put in the measure
for a bottle prepared
and placed in the
refrigerator.
7 ml
8 ml
10 ml
11 ml
12 ml
13 ml
14 ml
15 ml
16 ml
17 ml
Quantity of water
to put in the measure
for a jar kept in the
10 ml
12 ml
15 ml
10 ml
12 ml
12,5 ml
13 ml
13,5 ml
14 ml
14,5 ml
15 ml
15,5 ml
16 ml
refrigerator.
18 ml
22 ml
28 ml