Cleaning And Storage - EASYmaxx 03888 Anleitung

EN
• The device heats up via heating coils and a fan. As soon as the set temperature is
reached, the heating coils stop heating and the fan switches off. As soon as the am-
bient temperature drops back below the set temperature, the heating coils and the
fan switch on again.
• The fan will continue to run for around 10 seconds once the heating function has
been switched off.
Lighting
• The "fi replace look" lighting can be set to four brightness levels. They are shown on
the display via the symbol
• Press the
Timer
• For each day of the week, it is possible to set a time at which the device will switch
on automatically.
• The device will adopt the brightness and heating level set most recently.
• The device must be manually switched to stand-by mode.
1. Press the WEEK / TIME button (30) to access the timer menu. The symbol for setting
the time fl ashes on the display.
2. Press the DAY button to access the day setting. Set the day you want using the +
and – buttons.
3. Set the time you want in the same way using the HOUR and MIN buttons.
4. Repeat this setting for other days if necessary.
5. Press the SET UP button (29) to switch on the timer. ON (19) appears on the display.
Press the WEEK / TIME button again to confi rm the settings and exit the timer menu.
6. To switch off the timer, press the WEEK / TIME button to access the timer settings
again. Then press the SET UP button again until OFF appears in the timer display.

Cleaning and Storage

PLEASE NOTE!
■ Switch off the device, pull the plug out of the plug socket and allow the device to cool
down before doing any cleaning.
■ Do not use any caustic or abrasive cleaning agents for cleaning. These can damage
the surface.
• Dust down the housing of the device if necessary or wipe it down with a damp cloth if
necessary. Then wipe it dry with a dry cloth.
• Clean the glass panel with a standard commercial glass cleaner. Then thoroughly
wipe it dry.
• When not in use, the device should be stored in a clean, dry place which is protected
from dust and is not accessible to children and animals.
(20).
button (25) to set the brightness level you want (from bright to dark).
24