EASYmaxx 03888 Anleitung Seite 21

Operation via the Control Panel
• Press the button (10). The device switches on. The "fi replace look" lighting (4) and
the display (2) light up and the heating function starts automatically.
• To switch off the device, press the
• The following settings can be made:
Time
1. Press the button (14) to access the settings for the time. The symbol for setting the
time (21) fl ashes on the display.
2. Set the current day of the week (18) using the + button (11) and – button (12).
3. Confi rm the entry with the
4. Set the current hour and minute in the same way.
Heating function
• The device has two heating levels. They are shown on the display via the symbol
(16) ( = heating level I,
• Press the button (15) to set the heating level you want or switch off the heating
function (sequence: Heating level I – Heating level II – Heating function off).
• The fan will continue to run for around 10 seconds once the heating function has
been switched off.
Lighting
• The "fi replace look" lighting can be set to four brightness levels. They are shown on
the display via the symbol
• Press the button (13) to set the brightness level you want (from bright to dark).
Operation via the Remote Control
• Press the button (24). The device switches on. The "fi replace look" lighting (4) and
the display (2) light up and the heating function starts automatically.
• To switch off the device, press the
• The following settings can be made:
Time
1. Press the DAY button (31) to access the day setting. The symbol for setting the time
(21) fl ashes on the display.
2. Set the current day of the week (18) using the + button (24) and – button (26).
3. Set the current hour in the same way using the HOUR button (27) and the current
minute using the MIN button (28).
These settings do not need to be confi rmed. They are saved automatically as soon as
another setting is made or no setting is made for approx. 10 seconds.
Heating function
• The device has two heating levels. They are shown on the display via the symbol
(16) ( = heating level I,
• Press the button (32) to set the heating level you want or switch off the heating
function (sequence: Heating level I – Heating level II – Heating function off).
• Use the + and – buttons to set the temperature as you wish (from 15 – 30°C).
23
button. The device switches to stand-by mode.
button.
= heating level II).
(20).
button. The device switches to stand-by mode.
= heating level II).
EN