Bamix SliceSy Gebrauchsanleitung Seite 18

2. Working with the tools (I)
Application: grates and slices raw and cooked vegetables (leek,
tomatoes – halved or quartered, cucumbers, radishes, carrots etc),
fruits, cheese etc.
Insert the discharge plate (B) into the bowl (A).
Make sure that the four notches of the plate (marked with ar-
rows) match the protrusions of the bowl (fig. J).
Before inserting the discharge plate, make sure there is no
food left in the bowl.
Mount the desired tool (I) into the opening of the tool holder (D) and
put the tool holder on the spindle of the discharge plate (B) (fig. I).
The tools (I) are very sharp! Be careful not to injure yourself
when handling them. Never leave the tools within reach of
children.
Place the transmission unit (E) onto the bowl (A) to close it.
Put your bamix
fruits or vegetables into the feed tube (G).
Tip: You get better results if the feed tube is full along its entire width.
the job (and will extend the life of your SliceSy
Never insert hard objects (such as bones, spoons etc.) into the
feed tube (G).
The patented discharge plate (B) makes it very easy to take the fini-
shed food out of the bowl (A) (see fig. K).
14
Important: Make sure that the tool (I) is well-positioned
in the tool holder (listen for the «click»).
vertically on the transmission shaft (F) and fill
®
Important: Do not press the food or the pusher (H) too
hard. The pressure of one finger should be enough to do
).
®