Atlas Copco RRH 06P Bedienungsanleitung Seite 7

WMV-Dresden, Ersatzteilservice für Elektrowerkzeuge, Motor- und Gartengeräte
RRH 06P
condition for a specified number of years at a fixed
cost, with full documentation
• Fixed Price Repairs
A fixed price repair program that ensures faster
turn-arounds and cuts administration costs at every
level. Combined with our Service Box concept,
it results in further reductions in administration
and handling costs
• ToolScan™
Identify problems before they occur. Ask for Tool-
Scan™ and an experienced Atlas Copco service
engineer will check the status of your tools on-site
for a fixed price. A full report of the findings on
each tool is provided after every ToolScan™
• Calibration Services
Let us handle your tool and equipment calibration.
We have experienced personnel, state-of the-art
equipment, and accredited calibration laboratories
operating in compliance with ISO 17025 standards
• ToolStart
We offer tool installation and start-up by qualified
Atlas Copco engineers at a fixed price. The service
also includes: Programming, test running, and
operator training
• Training
Atlas Copco offers a wide range of training and
seminar programs relating to tools, systems and
software. Courses start with a theoretical platform,
and lead to instruction on practical implementation
in your business
For more information about these services, please
contact your Atlas Copco service sales representat-
ive.
Our Service Box concept cuts administration and
handling costs.
Service Kits
Even the best tool needs maintenance and overhaul.
Continous industrial use in tough working environ-
ments wear out some parts. Before a tool breaks
down it loses power and becomes less productive.
A gradual change can be difficult to detect. Atlas
Copco Service Kits will give new life to your tool.
Everything you need to recondition your tool is
contained in just one Kit. Instead of replacing an in-
dividual part i.e. vanes, as they wear out, recondition
the entire tool with an Atlas Copco Tools Service
Kit. This will guarantee a good function of your tool
and added assurance of dependability.
Service tools
The service tools which should be used to facilitate
rational and fast overhauling are listed in Service
instructions and in the exploded views.
Service boards and service tool sets
Besides the recommended service tools, for this
specific machine, we can offer complete service
boards with service tool sets. As optional equipment
we can also offer a "Board cabinet" which suits the
Service Boards. Boards and cabinet are in a yellow
colour. The size of the boards is
980×960×1.5 mm.The boards are equipped with tool
holders, transparent film with black silhouettes of
the service tools (brackets to assemble the boards on
the wall incl.) For more information please read Atlas
Copco Service News concerning Service boards and
tools, Ordering No. 9835 5485 00.
Technical data
Noise and vibration emission
Noise (according to PN8NTC1.2)
Measured sound pressure level
Determined sound power level
Spread in method and production
Vibration (according to ISO 8662-2)
Measured vibration value
Spread in method and production
Optimal feed force range
Declaration of noise and vibration emis-
sion
These declared values were obtained by laboratory
type testing in compliance with the stated standards
and are not adequate for use in risk assessments.
Values measured in individual work places may be
higher than the declared values. The actual exposure
values and risk of harm experienced by an individual
user are unique and depend upon the way the user
works, the workpiece and the workstation design, as
well as upon the exposure time and the physical
condition of the user.
We, Atlas Copco Tools AB, cannot be held liable
for the consequences of using the declared values,
instead of values reflecting the actual exposure, in
an individual risk assessment in a work place situ-
ation over which we have no control.
Atlas Copco Tools - 9836 1974 00
Safety and operating instructions
dB(A)
89
102
3
2
m/s
<2.5
-
100-180 N
7