Bs Ringer Volume; Keypad Beep; Confirm Beep; Telephony - Silvercrest SDKT 1.76 A1 Bedienungsanleitung Und Serviceinformationen

Bs Ringer Volume

You can adjust the ringer volume of the base in 5 levels (5 = very high; Off = no ringtone). Press the 
or  directional control buttons [4] to set the desired volume. To save the selected setting, press the
right display button [3].

Keypad Beep

Press the  or  directional control buttons [4] to enable or disable the keypad beep. To save the
selected setting, press the right display button [3].

Confirm Beep

Press the  or  directional control buttons [4] to enable or disable the confirm beep. To save the
selected setting, press the right display button [3].

Telephony

Dial Mode

There are two different dial modes that you can use with your telephone.

Tone
Tone dialling is the most popular dialling method nowadays.

Pulse
Pulse dialling is normally used with older devices.
Press the  or  directional control buttons [4] to select the desired dial mode. To save the selected
setting, press the right display button [3].

Auto Talk

If the handset is on the base when an incoming call arrives, the call can be accepted automatically by
removing the handset from the base. Press the  or  directional control buttons [4] to switch this
function on or off. To save the selected setting, press the right display button [3].

Recall

You can use the Recall button ( ) of the directional control [4] during a call for switching to an internal
conversation or to forward the call when using the device with a PBX. The Recall button ( ) will cause
a short, temporary line interruption.
SilverCrest SDKT 1.76 A1
139 - English