Bottom View Of Base; Before You Start; Connecting The Base - Silvercrest SDKT 1.76 A1 Bedienungsanleitung Und Serviceinformationen

Bottom View of Base

25. Cable guides
26. Telephone connection socket
27. Power adapter socket

Before You Start

Connecting the Base

You'll find a figure of the components mentioned below in the Package Contents section on
page 106.

Plug the power adapter [A] into a wall outlet. Connect the plug using the power adapter
socket [27] on the bottom of the base [B].

Using the supplied telephone cord [F], connect the telephone connection socket [26] on the
bottom of the base to the telephone wall jack.

Secure the cables in the corresponding cable guides [25].
If possible, do not place the base in living rooms or bedrooms. Choose a place where you
are usually not present all the time (e.g. on the corridor). The low-power ECO mode will
already avoid unnecessary exposure to radiation. For more information, please read the
ECO Mode chapter on page 126.
SilverCrest SDKT 1.76 A1
115 - English