Getting Started; Switching The Handsets On And Off; Setting The Menu Language; Setting The Date And Time - Silvercrest SDKT 1.76 A1 Bedienungsanleitung Und Serviceinformationen

Getting Started

Switching the Handsets On and Off

As soon as a handset is placed onto the base or the charger cradle it powers on automatically. You
can also use the End call button [5] to power your handsets on or off. To do so, press and hold the End
call button [5] for longer than three seconds.

Setting the Menu Language

You can set the menu language for each handset independently. Proceed as follows:

While the handset is in standby mode, press the right display button [3] to show the menu.

Press the  or  buttons of the directional control [4] to select the Settings menu
( ).

Press the right display button [3] to confirm your selection.

Select the Language menu item.

Press the right display button [3] to confirm your selection.

Press the  or  directional control buttons [4] to select the desired language from the list.

Press the right display button [3] to confirm your selection.

A confirmation beep can be heard.

Setting the Date and Time

When powering the device on for the first time, please set the date and time prior to using it. Proceed
as follows:
If you still have the Settings menu opened, you can skip the first three items and directly
select the Date and Time item.

While the handset is in standby mode, press the right display button [3] to show the menu.

Press the  or  buttons of the directional control [4] to select the Settings menu
( ).

Press the right display button [3] to confirm your selection.

Select the Date and Time item.

To set the time or the date, select the Date and Time item again.

Here you can set the year, month, day, hours and minutes in sequence. Enter the desired
value via the numeric buttons [6].

When saving the entered value by pressing the right display button [3] the cursor moves to
the next value.
SilverCrest SDKT 1.76 A1
117 - English