Date And Time; System Pin; Display - Silvercrest SDKT 1.76 A1 Bedienungsanleitung Und Serviceinformationen

Date and Time

Date and Time
Here you can set the year, month, day, hours and minutes in sequence. Enter the desired value via the
numeric buttons [6]. When saving the entered value by pressing the right display button [3] the cursor
moves to the next value.
A beep will sound after the entire input has been completed.
Set Time Format
Use the  or  directional control buttons [4] to select the 12-hour or 24-hour time display. Press the
right display button [3] to confirm your selection.
Auto Update
You can use this menu item to toggle Auto Update on or off.
If the Caller ID feature has been enabled for your telephone line and your telephone provider transmits
the date and time, these will be updated automatically each time you receive a call (as long as this
function is enabled).

System PIN

To change the System PIN for the base, proceed as follows:

First enter the old 4-digit PIN (default 0000).

Press the right display button [3] to confirm your input.

Enter the new 4-digit PIN.

Press the right display button [3] to confirm your input.

Enter the new 4-digit PIN again to confirm.

A beep will sound after the input has been completed.

Display

Contrast
Here you can set the display contrast. The possible settings are Low, Middle and High.
Backlight Time
Here you can set how long the display should be illuminated.
The possible values are 10s, 20s, 30s or 40s.
SilverCrest SDKT 1.76 A1
121 - English