Conceptronic Grab’n’GO CHD2UL Schnellstartanleitung Seite 13

ENGLISH
4. Create and format a partition on the CHD2UL
It is possible that the hard disk you are using is not
partitioned/formatted yet. In this situation the CHD2UL will not
show a replaceable hard disk with partitions in your operating
system. To create and/or format the partition on the CHD2UL, you
can use the default Windows format utility, or the program
Swissknife, which you can find on the CD-ROM enclosed with the
CHD2UL. This freeware software tool is a Windows program used to
create/format partitions in your hard drive.
The Swissknife application has to be installed with the "Setup.exe"
file found in the "\Swissknife\" folder.
Please check:
http://www.compuapps.com/download/Swissknife/swissknife.htm
for updates of the Swissknife tool software.
1. Install the application SwissKnife
2. Connect the CHD2UL to the computer.
3. Run the program SwissKnife.
The following screen will appear:
13