Conceptronic Grab’n’GO CHD2UL Schnellstartanleitung Seite 12

ENGLISH
3.2 Cable connections
a. Connect the USB cable to the CHD2UL and to a free USB
port on your computer. The device will automatically
power on.
Windows 2000 & XP Automatically will recognize the hard disk. No
driver installation is required to operate the CHD2UL.
Note: Some computers do not supply enough power on
the USB port, which results in a not-booting hard
disk. In that situation, use the supplied Power-to-
USB cable to add extra power to the CHD2UL.
12