USRobotics USR9110 Installationsanleitung Seite 25

I uninstalled the Configuration Utility and my computer doesn't detect the
802.11g 54Mbps USB Adapter when I attempt to reinstall the Configuration
Utility.
Possible Solution:
If you uninstalled the Configuration Utility and then reinstalled it, you will need to unplug
and then plug back in the 802.11g 54Mbps USB Adapter. Your computer will then detect
the 802.11g 54Mbps USB Adapter.
When I perform a Site Survey, I cannot locate the wireless network to which I
want to connect.
Possible Solution:
If you do not see the correct wireless network, click Refresh.
If you still do not see the correct wireless network when you perform a Site Survey, try
creating a profile using the necessary connection information for the appropriate
wireless network, selecting the profile, and then clicking Apply in the Configuration tab.
Refer to the "Navigating the Wireless Configuration Utility" section of the 802.11g
54Mbps USB Adapter User Guide on the Installation CD-ROM for more information about
creating a profile.
For more troubleshooting information or for advanced wireless configuration options,
refer to the User Guide on the Installation CD-ROM or go to www.usr.com/support
Additional Support
Note: The product number for the 802.11g 54Mbps USB Adapter is 5422. The product number for the
Wireless 54Mbps ADSL Router is 9110. You can find your serial number on the label on each product
and on the side of the package. Write your serial number down. If you ever need to call our Technical
Support department, you will need this number to receive assistance.
Model Number Serial Number
USR9110
USR5422
21