USRobotics USR9110 Installationsanleitung Seite 10

1. Launch a Web browser. In the location or address line of your Web browser, type
http://192.168.2.1 to access the Web User Interface. By default, there is no
password, so click LOGIN to access the Web User Interface.
Note: If you are prompted to connect to the Internet, you may need to select Try
Again or Connect, depending on your Internet browser.
2. Select your country and click Apply. Verify you have selected the correct country
and click OK.
3. The Web User Interface will open and the Setup Wizard will begin. Click NEXT.
4. Follow the on-screen instructions to create a password for access to the router.
Remember that there is no current password to enter. After creating and confirming
a password, click NEXT.
5. Set up and specify your wireless and security settings. When you are finished, click
NEXT.
6. Select the country of your Internet Service Provider (ISP) and the name or type of
your ISP. Depending on what you choose for ISP, you will need to enter the
appropriate connection information from them. Click NEXT.
7. Review all of the information. If it is all correct, click NEXT to complete the Setup
Wizard. You should now have Internet access. If any of the information is not
correct, click BACK to get to the appropriate screen, modify the information, and
then continue the configuration.
8. The information you supplied will be saved and the main screen of the Web User
Interface will appear.
If at any time you want to validate your Internet settings, click Status.
Note: If you have not already set up security for your wireless network, it is
recommended that you do so at this time. Refer to the "Configuring the
Wireless 54Mbps ADSL Router" section in the User Guide for more information.
6