USRobotics USR9110 Installationsanleitung Seite 19

Windows 95, 98, or Me Users: Click Windows Start and then Run. Type
winipcfg and click OK. Check the IP Address, Subnet Mask, Default Gateway,
and DNS server data to make sure they are correct. If the information is not
correct, click Release All and then click Renew All.
Windows NT, 2000, or XP Users: Click Windows Start and then Run. Type cmd
and click OK. At the DOS prompt, type ipconfig /all. Check the IP Address,
Subnet Mask, Default Gateway, and DNS server data to make sure they are
correct. If the information is not correct, type ipconfig /release and press
ENTER. Then, type ipconfig /renew and press ENTER.
Possible Solution:
You need to verify the connection setting of your Web browser and that the HTTP Proxy
feature of your Web browser is disabled. You need to do this so that your Web browser
can read the configuration pages inside your Wireless 54Mbps ADSL Router. Launch your
Web browser.
Internet Explorer users: Click Tools, Internet Options, and then the Connections
tab. Select Never dial a connection, click Apply, and then click OK. Click Tools
again, then click Internet Options. Click the Connections tab, and click the LAN
Settings button. Clear all the check boxes and click OK. Click OK to close Internet
Options.
Netscape Navigator users: Click Edit, Preferences, and then double-click Advanced
in the Category window. Click Proxies, select Direct connection to the Internet, and
then click OK. Click Edit again, then click Preferences. Under Category, double-click
Advanced, then click Proxies. Select Direct connection to the Internet and click OK.
I am no longer able to access the Internet through the Wireless 54Mbps ADSL
Router.
Possible Solution:
Make sure that the power cord, the phone cable, and the Ethernet cable are all
connected correctly.
15