G 54Mbps Usb Adapter Installation; Prepare For Installation - USRobotics USR9110 Installationsanleitung

802.11g 54Mbps USB Adapter Installation

Prepare for Installation

ATTENTION: You must install your software and drivers before you physically connect
the 802.11g 54Mbps USB Adapter.
Model Number Serial Number
USR5422
Note: For the most updated information, visit: http://www.usr.com/support
Turn on your desktop or laptop computer. Type your password if you are prompted to do
so.
Be sure to find out what letter your CD-ROM drive uses before you begin installing your
new product. You will need to know this to properly install your software.
During the Installation procedure, you may be prompted for your Windows Operating
system CD-ROM. Make sure you have it available in case you need it.
If the 802.11g 54Mbps USB Adapter does not fit into an available USB port on your
computer because of other USB devices that are connected, use an USB extension cable
or a USB hub to connect the 802.11g 54Mbps USB Adapter.
If you are connecting the 802.11g 54Mbps USB Adapter to a 1.1 USB port, you may see a
message informing you that a Hi-Speed USB device is being connected to a USB port
that is not Hi-Speed. This will not affect the installation procedure.
9