Introduction; Note About The Reference Manual; Included Items; Precautions For Placement And Use - Tascam Celesonic US-20x20 Bedienungsanleitung

Introduction

Thank you very much for purchasing the TASCAM US-20x20 USB
Audio MIDI Interface with Mic Pre/Mixer.
Before connecting and using this unit, please take time to
read this manual thoroughly to ensure you understand how to
properly set it up and connect it, as well as the operation of its
many useful and convenient functions. After you have finished
reading this manual, please keep it in a safe place for future
reference.
Before connecting this unit to a computer, you must
download and install dedicated software on the computer.
This product has a Blackfin® processor made by Analog
Devices, Inc.

Note about the Reference Manual

This Owner's Manual explains each of the functions of this unit.
Please see the Reference Manual for detailed information about
each of the functions.
You can download the Reference Manual from the TEAC Global
Site (http://teac-global.com/).

Included items

This product includes the following items.
Keep the box and packing materials for transportation in the
future.
Please contact TASCAM Customer Support (see page 2) if any of
these items are missing or have been damaged during transpor-
tation.
0 Main unit ........................................................................................× 1
0 AC adapter (GPE248-120200-Z)
(with output plug A/B for replacement) .............................× 1
0 USB 2.0 cable ................................................................................× 1
0 USB 3.0 cable ................................................................................× 1
0 Hex key ...........................................................................................× 1
0 Rack mount angles .....................................................................× 2
0 Rack mount angle attachment screws ................................× 4
0 Owner's Manual (this document) including warranty ..× 1
CAUTION
• Always use the included AC adapter (GPE248-120200-Z)
when using this unit. Never use the included AC adapter
with any other device. Doing so could cause damage, fire or
electric shock.
• Which of the included cables (USB 2.0 or USB 3.0) can be
connected depends on the computer and operating system
being used. (See "Connecting with a computer" on page
10.)
NOTE
The included AC adapter (GPE248-120200-Z) is shipped with
alternate outlet plugs. Please see "Changing the outlet plug"
in "4 – Preparation" in the Reference Manual for instructions
about how to do this.

Precautions for placement and use

0 The operating temperature range of this unit is 5–35 °C.
0 Do not install this unit in the following types of locations.
Doing so could make the sound quality worse or cause
malfunction.
Locations with frequent vibrations
Next to a window or in another location exposed to
direct sunlight
Near heating equipment or in other locations that
become very hot
Extremely cold places
Places with bad ventilation or high humidity
Very dusty locations
0 To enable good heat dissipation, do not place anything on
top of the unit.
0 Do not place the unit on top of a power amplifier or other
device that generates heat.
0 When mounting this unit in a rack, leave at least 1U of space
open above it in the rack.

Using the TEAC Global Site

You can download the Owner's Manual and the Reference
Manual necessary for this unit from the TEAC Global Site (http://
teac-global.com/).
1. Open the TEAC Global Site (http://teac-global.com/).
2. In the TASCAM Downloads section, click the desired
language to open the Downloads website page for that
language.
NOTE
If the desired language does not appear, click Other
Languages.
3. Click the product name in the "Search by Model Name"
section to open the Downloads page for that product.
4. Select and download the Owner's Manual that are needed.

Beware of condensation

Condensation could occur if the unit is moved from a cold place
to a warm place, it is used immediately after a cold room has
been heated or it is otherwise exposed to a sudden temperature
change.
To prevent this, or if this occurs, let the unit sit for one or two
hours at the new room temperature before using it.

Cleaning the unit

To clean the unit, wipe it gently with a soft dry cloth. Do not
wipe with chemical cleaning cloths, benzene, thinner, alcohol or
other chemical agents. Doing so could damage the surface or
cause discoloration.

User registration

Customers in the USA, please visit the TASCAM website (http://
tascam.com/) to register as a user online.
5
TASCAM US-20x20