Connecting The Power; Changing The Outlet Plug; Connecting With A Computer - Tascam Celesonic US-20x20 Bedienungsanleitung

Connecting the power

Use the included AC adapter to connect a power supply to the
unit as shown below.
Power outlet
GPE248-120200-Z (included)
In order to prevent the cord from becoming disconnected
during use, wrap it around the cord holder when connecting it.
CAUTION
Always use the AC adapter (GPE248-120200-Z) that was
shipped with the unit. Using a different AC adapter could
cause malfunction, overheating, fire or other problems.
NOTE
The AC adapter for the unit includes two types of outlet
plugs. Attach the type of plug that matches the power outlet
that you are using. See "Changing the outlet plug" on page
10.

Changing the outlet plug

1
1 M ove the latch on the AC adapter in the direction of the
arrow.
2 P ull off the outlet plug.
3 R eplace it with the other outlet plug (A or B).
4 M ove the latch on the AC adapter in the direction of the
arrow again.
5 A ttach the outlet plug to the AC adapter.
After changing the outlet plug, confirm that it is not loose
or crooked and that everything is normal before plugging
it into an outlet
10
TASCAM US-20x20
DC plug
3
2
5
4
CAUTION
Do not use the adapter if there is anything abnormal about
the plug after changing it. Use when the plug is abnormal
could cause fire or electric shock. Contact the retailer where
you purchased the unit or a TEAC service center (on the back
cover) to request repair.

Connecting with a computer

Two types of USB cables (USB 2.0 and USB 3.0) are included with
this unit.
Select one of the included USB cables according to the
computer and operating system being used and use it to
connect the unit to a computer USB 2.0 or USB 3.0 port.
NOTE
A USB2.0 speed connection will be used if the unit is
connected to a USB3.0 port on the computer using a USB2.0
cable.
Check the TEAC Global Site (http://teac-global.com/) for the
latest information about supported operating systems.
Windows
8
Supported operating
systems
Windows 10 32-bit
Windows 10 64-bit
Windows 8 (including 8.1)
32-bit
Windows 8 (including 8.1)
64-bit
Windows 7 32-bit SP1 or later
Windows 7 64-bit SP1 or later
* Connect with the included USB 3.0 cable to use at USB 3.0
speed.
Mac
8
Supported operating
systems
OS X Yosemite (10.10.1 or later)
OS X Mavericks (10.9.5)
OS X Mountain Lion (10.8.5)
USB standard
Connected
USB cable
USB 2.0 USB 3.0
USB 3.0 cable*
ü ü*
USB 2.0 cable
ü ü*
-
ü
USB 2.0 cable
-
ü
-
ü
USB 2.0 cable
-
ü
USB standard
Connected
USB cable
USB 2.0 USB 3.0
- USB 2.0 cable
ü
- USB 2.0 cable
ü
- USB 2.0 cable
ü