The Line-In Connector - Block CVR-100+MK II Bedienungsanleitung

Setup up and operation of multi-room systems
To integrate your CVR-100 + MKII into a multi-room system, e.g. to the Smartbox SB-100 from Audioblock,
please read the supplied instructions for the App „UNDOK ™", which is mandatory for the configuration.
Please note that the multi-room functionality is only available from 01/2016 onwards!.
The optical connections
The rear optical connections of the CVR-100 + MKII (also S / PDIF® or TOSLINK®) process stereo light wave signals
in digital form (no Dolby® surround or similar). These connections are particularly suitable for external CD play-
ers, data recorders or many modern televisions. For most televisions, the optical audio output on the TV menu
must first be activated. For the connection, please consult the operating instruction of the external device. A
suitable cable is available in an accessory shop.
The coaxial connection
The rear coaxial connector of the CVR-100 + MKII processes electrical stereo audio signals (no Dolby® surround
or similar) in digital form. This connection is particularly suitable for external CD players, data recorders or sa-
tellite receivers. For the connection, please consult the operating instruction of the external device. A suitable
cable is available in an accessory shop.
The AUX connection
The rear AUX connector of the CVR-100 + MKII processes electrical high-level audio signals in analogue form.
This connector is suitable for all external devices with analogue audio output. For the connection, please con-
sult the operating instruction of the external device. A suitable cinch cable is available in an accessory shop.
The TV and DVD connection
The rear TV and DVD connections of the CVR-100 + MKII process electrical high-level audio signals in analogue
form. These connections are suitable for all external devices with analogue audio output, for example, for the
connection of a TV, DVD player or satellite receiver with analogue audio output (e.g. over the headphone output
of the TV). For the connection, please consult the operating instruction of the external device.. A suitable cinch
cable is available in the accessory shop.
The phono connection
The rear phono connector of the CVR-100 + MKII processes electrical high-level audio signals in analogue form.
This connection is suitable for record players with MM system (common), but not for MC systems (rare). For the
connection, please consult the operating instruction of the external device. To prevent a hum, please connect
an existing earth cable to the record player and the CVR-100 + MKII. A suitable disc player cinch cable with groun-
ding is available in the accessory shop.
56
The pre-out output
The rear pre-out output sends high-level electrical audio signals in analogue form. These signals will not change
in sound and volume after the settings made on the CVR-100 + MKII. This output is particularly suitable for an
additional amplifier, e.g., an active subwoofer in a second room, or radio loudspeakers, e.g. for terrace or
kitchen.
The Rec-Out output
The rear rec-out output sends high-level electrical audio signals in analogue form. These signals will not change
in sound and volume after the settings on the CVR-100 + MKII, but transmitted unchanged from the respective
signal source. This output is particularly suitable for recording devices such as tape recorder or cassette recor-
der. The USB connection
The USB connection
See page 51 for a more detailed description of the USB front connector.

The line-in connector

The line-in connector located behind the magnetic cover at the front of the CVR-100 + MKII processes electrical
high-level audio signals in analogue form. This connector is suitable for all external devices with analogue audio
output, like media players, iPod®, smartphones etc. (connection over headphone output). For the connection,
please consult the operating instruction of the external device. A suitable 3.5 mm cable is available in the ac-
cessory shop
The headphone connection
The headphone jack of the CVR-100 + MKII, located behind the magnetic cover on the front, allows you to con-
nect a commercially available headphone with 6.3 mm jack plug. A 3.5 mm jack adapter for smaller headphones
can be obtained from the accessory shop.
The loudspeaker outputs
The CVR-100 + MKII is equipped at its back with two high-quality gold-plated terminal pairs for the connection
of loudspeaker cables. Cables can be connected either via banana plugs mounted on the cables (plug-in moun-
ting) or via the screwable terminal heads with the stripped loudspeaker cable (screw mounting).
57