Destination Entry / Save Position; Route Options - FALK IBEX Kurzanleitung

deStination entrY
On the main menu select „Destination Entry > Address".
You can use the keypad which is shown to enter first the
city, then the street and street number.
Confirm your entry for city, street and street number in
each case by clicking on „Next" and then on „Calculate"
to start the route calculation.
As well as entering an address, other entry options are
available to you such as POIs, waypoints or coordinates.
SaVe poSition
Do you want to find a specific location again at a later date? Then you can save this location as a waypoint. This will allow you to
navigate there again very easily at a later date.
To do this, on the main menu choose „Extras" > „Save position". Enter a name and tap on „OK".
In outdoor mode, the position is saved as a waypoint. You will find the waypoints on the main menu in the
„Extras" > „waypoint Manager".
28

route optionS

Create your own individual route by adjusting the route options to your needs. You can set the route options after every destination
entry. Or you tap on the main menu on „Settings > Route Options".
First select the means of transport (bicycle or pedestrian).
Tap on „Next".
Now specify the type of route:
flat gives preference to routes with inclines of 0-4%
hilly gives preference to routes with inclines of 4-8%
short calculates the shortest route to the destination,
regardless of inclines
linear distance shows a straight line towards the destination starting
from your current position
Tap on „Next".
Choose the modes of transport that you want to use, prefer or avoid on the route,
for example steep gradients, via ferrata or hiking trails. Confirm your selection with „Done".
After the route calculation, you have the following options:
Calculates two alternative routes
Shows the altitude profile
for the calculated route
optional: Via „Bus&Train" you
can have a Bus&Train connection
calculated. „Navigation" starts
the routing.
note:
By setting the route options, you
can also avoid unwanted detours.
Always note the activity profile
which is set (pedestrian or cyclist)
as this can entail considerable
changes to the route. In addition
to your route, calculate for examp-
le two other alternative routes
Shows information about the route
and redefine the options for the
alternatives. In addition to the dif-
ferent route options, the modes of
Drag and drop route
transport can also be preferred or
Change the route options
avoided. The altitude profile and
Edit the route
the course on the map show you
how the different routes differ.
29