Velleman DTP6 Bedienungsanleitung Seite 4

Hold
Celsius & Fahrenheit
7. Cleaning and maintenance
• You can clean the stainless steel probe after use with a damp
cloth and a little soap.
• Keep the plastic part of the device out of the water. Immersing
the device in water will cause malfunction or permanent failure.
8. Technical Specifications
measuring range
resolution
power supply
LCD size
probe length
total length
Weight
Spare battery
Use this device with original accessories only. Velleman nv
cannot be held responsible in the event of damage or injury
resulted from (incorrect) use of this device.
For more info concerning this product and the latest version
of this manual, please visit our website www.velleman.eu.
The information in this manual is subject to change without
prior notice.
© COPYRIGHT NOTICE - The copyright to this manual is
owned by Velleman nv. All worldwide rights reserved.
No part of this manual or may be copied, reproduced, translated or
reduced to any electronic medium or otherwise without the prior
written consent of the copyright holder.
V. 00 – 22/03/2012
DTP6
Press the HOLD button [4] to hold the
temperature value when measuring. Press
Press the button ℃/℉ [3] to switch
again to start new measuring.
between Celsius & Fahrenheit.
-50°C~+300°C (58°F~572°F)
± 0.1° °C/°F
1 x LR44 (1.5V) battery (incl.)
22 x 10mm
145mm
235mm
22g
(not included): V13GAC, see www.velleman.eu
4 ©Velleman nv