Product Description And Specifications - Bosch 10 RE Originalbetriebsanleitung

OBJ_DOKU-27517-001.fm Page 12 Thursday, July 21, 2011 9:15 AM
12 | English
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
Intended Use
The machine is intended for drilling in wood, metal, ceramic
and plastic. Machines with electronic control and right and
left rotation are also suitable for screwdriving and tapping.
Technical Data
Rotary drill
Article number
Rated power input
Output power
No-load speed
Rated speed
Rated torque
Spindle collar dia.
Speed control
Right/left rotation
Max. drilling dia.
– Steel
– Wood
– Aluminium
Chuck clamping range
Weight according to EPTA-Procedure 01/2003
Protection class
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
Please observe the article number on the type plate of your machine. The trade names of the individual machines may vary.
Noise/Vibration Information
Measured sound values determined according to EN 60745.
Typically the A-weighted noise levels of the product are:
Sound pressure level 83 dB(A); Sound power level 94 dB(A).
Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 60745:
2
Drilling into metal: a =5.0 m/s , K=1.5 m/s
h
2
Screwdriving: a =3.0 m/s , K=1.5 m/s
h
The vibration emission level given in this information sheet
has been measured in accordance with a standardised test
given in EN 60745 and may be used to compare one tool with
another. It may be used for a preliminary assessment of expo-
sure.
2 609 140 656 | (21.7.11)
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Keyless chuck
2 Front sleeve
3 Rear sleeve
4 Belt clip
5 Lock-on button for On/Off switch
6 On/Off switch
7 Rotational direction switch (GBM 10 RE)
8 Handle (insulated gripping surface)
9 Screwdriver bit*
10 Universal bit holder*
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
min
min
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained,
the vibration emission may differ. This may significantly in-
crease the exposure level over the total working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working pe-
2
,
riod.
2
.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.
GBM 10
Professional
3 601 D73 1..
W 600
W 360
-1
2600
-1
1676
Nm 20
mm 43
–
–
mm 10
mm 25
mm 10
mm 1 – 10
kg 1.7
/II
GBM 10 RE
Professional
3 601 D73 6..
600
360
0 – 2600
1676
20
43
10
25
10
1 – 10
1.7
/II
Bosch Power Tools