JB Systems iLEAD Bedienungsanleitung Seite 7

ENGLISH
6. Press the desired position ( 1~24 ) you selected again to insert
the new scene.
OVERWRITE A SCENE
1. Enter Program mode.
2. Press the MEMORY button.
3. Press the button ( 1 ~ 24 ) where the memory ( chase ) is saved
and select the scene that you wish to overwrite.
4. Press the same button ( e.g. 6 ) repeatedly, you can view the
scene one by one.
5. Create a desired scene.
6. Hold down the SAVE button and then press former selected
button ( 1 ~ 24 ) to overwrite a scene.
DELETE A SCENE
1. Enter Program mode.
2. Press the MEMORY button, choose the desired position (1~24)
in which you want to delete a scene.
3. Select the scene that you want to delete.
4. Hold down CANCEL and then press the former selected button
to delete a scene.
COPY A CHASE
1. Enter Program mode.
2. Press the MEMORY button.
3. Select an existed chase which you want to copy.
4. Hold down PAGE and then press a button ( 1 ~ 24 ) where you
want to copy the chase into it.
JB SYSTEMS 11/57
OPERATION MANUAL
iLEAD Controller
ENGLISH
DELETE A CHASE
1. Enter Program mode.
2. Press MEMORY button.
3. Hold down MEMORY button and then press a 1~12 button or
press PAGE to select a 13-24 button to delete a chase.
CLEAR ALL MEMORY
1. Press the BLACKOUT/STAND ALONE for 3 seconds, into
Stand-Alone mode.
2. Hold down the MEMORY button and then press BLACKOUT /
STAND ALONE button, all memory will be deleted.
LIGHT SHOW
1. Press LIGHT SHOW button. The LIGHT SHOW LED will light
up, indicating light show mode is active.
2. Press AUTO/SOUND/MIDI to activate Auto, Sound or MIDI
mode. The LEDs indicate which mode is activated.
3. Press the button ( 1 ~ 24 ) to run a desired lighting show.
When in Auto mode, you can set the light speed and fade time by using the sliders.
These settings will be kept when next time you run the same light show. When in
Sound mode activation, the Light show will be triggered by music, however, you can
still set the fade time of the light show.
OVERRIDE CONTROL
When running light shows, you can press the Override button to
control the fixture manually, the LED lights up indicating Override
function is activated. Press "Scanners" button to select the
fixtures you want to override.
JB SYSTEMS 12/57
OPERATION MANUAL
iLEAD Controller