ENGLISH
OPERATION MANUAL
Thank you for buying this JB Systems product. To take full advantage of all
possibilities, please read these operating instructions very carefully.
FEATURES
• Standard 19-inch rack mount
• Controls up to 192 DMX channels
• Controls 24 scanners with up to 8 DMX channels per fixture.
• 12 preset movements for instant show editing
• Sets DMX address of iSolution effects remotely
• 24 chases with up to 485 scenes
• Auto program (scenes and chases) controlled by Speed and X-Fade sliders
• Scanners control with Pan/Tilt joystick or Speed and X-Fade sliders
• Pan/Tilt joystick with Fine adjustment function
• Blackout function
• Override function gives complete control of selected fixtures
• Built-in microphone for Music triggering or (Audio) line in
• MIDI control for Chases, Blackout, Sound, Auto, Speed and X-Fade
• Power failure memory
• 2 extra easy controllers incorporated for immediate pre-programmed shows
• Fog Machine trigger button with "Heating" and "Ready" LED indicators
• Strobe trigger button with adjustable speed
BEFORE USE
Check the contents:
Check that the carton contains the following items:
• iLEAD Controller
• AC/DC adapter
• Operating instructions
Some important instructions:
• To prevent fire or shock hazard, do not expose this appliance to rain or moisture.
• In order to prevent electric shock, do not open the cover. If a problem occurs, contact
your dealer.
• Don't place metal objects or spill liquid inside the unit. Electric shock or malfunction
may result.
• Prevent use in dusty environments, clean the unit regularly.
JB SYSTEMS
OPERATION MANUAL
1/57
iLEAD Controller
ENGLISH
FUNCTIONS
(FRONT)
1. Scanners: To select one or more fixtures.
2. Movement: To select/set the pan & tilt movement.
3. Shutter: To set the strobe speed, shaking effect and open.
4. Gobo: To select gobo.
5. Color: To select color.
6. Rotation: To set the rotation speed and direction.
7. Dimmer: To set the dimmer intensity.
8. Focus: To adjust the appropriate focus.
9. Page/ Copy: To select memory 1~12 or 13~24 or activate memory copy.
10. Memory: To edit exist scenes or delete a chase.
11. Cancel: To delete a scene.
12. Save: To save or insert or overwrite a scene.
13. Auto/Sound/Midi: To set Auto/Sound/Midi three modes.
14. Light show: To run the Light Show.
15. Blackout/Stand Alone: To select Program/Blackout/Stand Alone three modes.
16. Fog: To activate Fog Machine.
17. Strobe: To activate Non-DMX Strobe. Hold on the Strobe button and press button
1 ~ 12 separately to change the strobe speed.
18. X-Fade: Controls with two different functions:
• To set fade time when running Light shows. Fade time is the amount of time it
takes for a scanner (or scanners) to move from one position to another.
• To set the tilt position of the Scanners when programming or to set the tilt
movement range for Movement function or to set DMX value 0~255 for
channels of Shutter/Gobo/ Color/Rotation/Dimmer/Focus.
19. Speed ( Wait time ) Controls with two different functions:
• To set chase speed ( wait time between scenes ) within the range of 0.1
second to 5 minutes when running light shows. The fade time of scenes will be
always completed,
Speed slider decides the wait time ( interval time )
between scenes.
• To set the pan position of the Scanners or to set pan movement range for
Movement function when programming.
20. Fine: To control the pan or tilt movement of the fixture in the smallest increments.
Push down the joystick to activate Fine function, push again to disable the
function.
21. Override: To override the fixture/ fixtures when the show is running.
JB SYSTEMS
OPERATION MANUAL
2/57
iLEAD Controller