Velleman HAMGSM133 Bedienungsanleitung Seite 9

Factory reset
Password
Command
Example
Enable SMS reception
Password
Command
Example
Result
Disable SMS reception
Password
Command
Example
Result
Enable ringtone reception
Password
Command
Example
Result
Disable ringtone reception
Password
Command
Example
Result
Set logic alarm level to HIGH (alarm when input under tension)
Password
Command
Example
Result
V. 02 – 15/05/2012
HAMGSM133
required
RES;pwd
pwd = current password (default = 12345)
RES;12345
required
SMSxxxxxxxx:ON;pwd
xxxxxxxx = position of the number in the list (1~8)
pwd = current password (default = 12345)
SMS15:ON;12345
Phone numbers on position 1 and 5 will receive an SMS when input status
changes. Other numbers are not affected. By default all eight phone numbers
receive an SMS.
required
SMSxxxxxxxx:OFF;pwd
xxxxxxxx = position of the number in the list (1~8)
pwd = current password (default = 12345)
SMS27:OFF;12345
Phone numbers on position 2 and 7 will NOT receive an SMS when input
status changes. Other numbers are not affected.
required
VOCxxxxxxxx:ON;pwd
xxxxxxxx = position of the number in the list (1~8)
pwd = current password (default = 12345)
VOC15:ON;12345
Phone numbers on position 1 and 5 will receive a ringtone when input status
changes. Other numbers are not affected. By default all eight phone numbers
receive ringtones.
required
VOCxxxxxxxx:OFF;pwd
xxxxxxxx = position of the number in the list (1~8)
pwd = current password (default = 12345)
VOC36:OFF;12345
Phone numbers on position 3 and 6 will NOT receive a ringtone when input
status changes. Other numbers are not affected.
LIVx:A
x = 1 (input 1) or 2 (input 2)
LIV2:A
Set alarm level on input 2 to high, alarm is activated when input 2 is under
tension. Default both inputs are set to level HIGH.
9 ©Velleman nv