Environmental Protection; Technical Specifications - Metabo L 60 Originalbetriebsanleitung

• Short circuit between the charging contacts.
Check charging compartment for foreign
bodies.
9 Repairs
Repairs to the charger must only be carried out by
qualified electricians.
If the mains connection cable of this tool is
damaged, in order to prevent endangering
personnel and property it must be replaced by the
manufacturer, or the Customer Service of the
manufacturer, or a similarly qualified person.
Metabo chargers requiring repairs can be sent to
the address on the next to the last page. Please
enclose a description of the fault with the power
tool.

10 Environmental Protection

Metabo's packaging can be 100% recycled. Worn
out chargers and accessories contain
considerable amounts of valuable raw and plastic
materials, which can be recycled.
These instructions are printed on chlorine-free
bleached paper.
Only for EU countries: Never dispose of
power tools in your household waste! In
accordance with European Directive 2002/
96/EC relating to electric and electronic machines
and implementation in national law, used electric
tools must be collected separately and disposed
of in an environmentally friendly manner at recyc-
ling centres.

11 Technical Specifications

See page 2.
A = Voltage ranges
of the battery packs
B = Charging current
C = Charging time
a function of the
battery pack capacity
D = Charge current with
conservation charging
1)
Depending on the residual capacity and the
temperature of the battery pack, real charging
times may deviate from the specifications.
Changes due to technological progress reserved.
1)
as
ENGLISCH
ENG
9