Specifications - Audio Pro LIVING LV33 Bedienungsanleitung

ENGLISH

SPECIFICATIONS

Type:
Powered wireless loudspeaker system
with DSP, 3-way bass reflex
Amplifier:
100W + 35W + 35W digital Class D, left
and right speaker
Tweeter: 3 x 1" silk dome
Midrange: 4.5"
Woofer: 6.5"
Frequency range:
30 – 24.000Hz
Crossover frequency:
300/3000Hz (24/24dB/octave L/R)
Dimensions HxWxD:
750x220x220 mm
OVERVIEW
REAR PANEL
Switch for Left, Mono, Right
To 230V AC outlet Main power
4
FEATURES
- Built-in wireless receiver in each speaker
- Wireless full CD quality sound
- Wireless range room to room: Up to 20 meters
- Wireless range same room: Up to 50 meters
- Wireless range open field: Up to 100 meters
- No interference or delays
- Works with both Mac and PC
- RF band: 2.4GHz
- Sample rate: 48 KHz
- Dedicated proprietary protocol
- Room adaptation, adjust bass
REMOTE
On/Off
Master volume
Shows selected
House Code in
display. 1, 2, 3
Source.
(Only used
in combination
with LV-HUB.)
OVERVIEW continued
Mute
TXD200 TRANSMITTER
Zone volume
1. House Code selector.
Choose channel for transmitter.
Shows selected
zone in display.
A, B, C
2. LED. Blue for connection. Red for no connection.
Green for paired connection.
3. Pairing button. Press on transmitter and speakers
to pair.
4. USB in. To connect to computer.
Or to connect power supply when using audio
source connected to line in.
5. Line in. Combined optical and analog. Use to
connect transmitter to other audio device than
computer
LED, steady blue for established wireless connection.
Flashing blue if wireless connection is lost.
Red for no wireless connection or no transmission.
Green for paired connection.
Volume control
House Code and Zone/Pair buttons
Display
IR receiver for remote
- To use remote, aim at IR-eye.
(Only speaker set to RIGHT or MONO Master can
be used via remote.)
- The displays shows: volume level, chosen channel
(House Code), chosen zone, and mute (–).
Note: Display shows information for 3 seconds
after adjustment
Beneath the grille on LV33 top is LED status indicator, buttons for
volume, button for House Code selection, button for Zone selection.
1. Volume, + to increase, – to decrease.
Each speaker can be set separately to adjust balance.
2. House Code (channel), one push displays chosen channel (1, 2, 3).
Further pushes changes channel 1>2>3 and back to 1.
3. Zone, one push displays chosen volume zone (A, B, C).
Further pushes changes channel A>B>C and back to A.
5