Specifications; Packing Contents - Audio Pro LV2 Bedienungsanleitung

ENGLISH
FEATURES
- Built-in wireless receiver in each speaker
- Wireless full CD quality sound
- Wireless range up to 50 m, 100m in line of sight
- No interference or delays
- Works with both Mac and PC
- RF band: 2.4GHz
- Sample rate: 44.1 KHz
- Dedicated proprietary protocol
- USB 2.0 interface

PACKING CONTENTS

Dedicated left and right speaker.
Only right speaker is equipped with remote receiver.
To use remote, always aim at right speaker.
Left speaker
1 x TX100 wireless transmitter
LED, blue for established wireless connection.
Red for no wireless connection or no transmission.
House Code switch
*Using the 3.5mm jack you can send wireless audio from units with line/
headphones output. (For example iPod, receiver, etc) TX100 will need an
aftermarket USB power supply in a setup using 3.5 mm jack.
Remote receiver on
Right speaker only
LED, blue for
established wireless
connection.
Red for no wireless
connection or no
transmission.
Right speaker
3.5mm stereo jack line in*

SPECIFICATIONS

Type:
Powered wireless loudspeaker system
with DSP,2 way bass reflex cabinet
Amplifier:
2 x 25W digital Class D,
left and right speaker
Tweeter: 1" soft dome
Woofer: 4.5"
Frequency range:
45 – 22.000Hz
Crossover frequency:
4000Hz (24dB/octave L/R)
Dimensions HxWxD:
210x145x180mm
Rear panel on speakers
To power supply
On/Off
Master volume
Zone volume
2 x power cord and power supply
House Code switch
Remote
Mute