Inhaltsverzeichnis
Werbung
The drivers can also be found under the Support tab on our website at
www.StarTech.com/TB3DK2DPPD
Install drivers in Windows 7
When the docking station is powered and connected to your host laptop, you need to
install the required drivers.
You may see a pop-up message requesting permission to allow the docking station to
connect to your computer. If a pop-up message appears, do the following:
1. Click on the pop-up message.
2. On the following prompt, click Always Connect in the drop-down list.
3. Click OK. If required, follow any other on-screen instructions.
Install Ethernet drivers in Windows 7
1. Download the latest driver. Use a web browser and navigate to
www.StarTech.com/TB3DKDPMAW
2. Click the Support tab.
3. Download the Intel_I21x.zip driver.
4. When the download is complete, extract the contents of the compressed file that
you downloaded.
5. Navigate to the location where you extracted the driver contents, and open the
Windows folder.
6. Double-click the Setup.exe file and follow the on-screen instructions to complete
the Ethernet driver installation process.
Install USB drivers in Windows 7
1. Download the latest driver. Use a web browser and navigate to
www.StarTech.com/TB3DKDPMAW
2. Click the Support tab.
3. Download the Fresco_FL1100.zip driver.
4. When the download is complete, extract the contents of the compressed file that
you downloaded.
5. Navigate to the location where you extracted the driver contents.
6. Double-click the Setup.exe file and follow the on-screen instructions to complete
the USB driver installation process.
Instruction manual
or www.StarTech.com/TB3DK2DPPDUE.
or www.StarTech.com/TB3DKDPMAWUE.
or www.StarTech.com/TB3DKDPMAWUE.
6
Werbung
Inhaltsverzeichnis
