Danfoss TP5001 Handbuch Seite 7

Use the + and - keys to scroll forwards or backwards
through the days of the week.
To deselect a day press V, (for example Day 2). To
select a day press Λ (for example Day 7).
Any deselected days are automatically assigned to programme "B".
Programming "A" programme days and events
a) Press PROG until the fi rst preset time and temperature (Event 1 for
Programme A) appears in display.
b) Use the + and - buttons to adjust the TIME
(press and hold to change in 10 minute
increments).
Use the Λ and V buttons to adjust the required TEMPERATURE.
c)
Press PROG to move to the next preset time and temperature
d)
(Event 2).
e) Repeat steps b, c, & d to programme the remaining events.
Programming "B" programme days and events
Press PROG until the fi rst preset time and temperature (Event 1 for
a)
Programme B) appears in the display.
Use the + and - buttons to adjust the TIME
b)
(press and hold to change in 10 minute
increments).
c) Use the Λ and V buttons to adjust the required TEMPERATURE.
d) Press PROG to move to the next preset time and temperature
(Event 2).
e) Repeat steps b, c, & d to programme the remaining events.
Running the programme
Press PROG to return to RUN, the colon in the display will blink. The
heating will now follow the times and temperatures
programmed.
GB
7