Installing And Attaching The Tweeter; Surface Installation - Rainbow Dream Line SLX 210 Einbauanleitung

Alternative installation Woofer 100 SLX:
•
For installation in the dashboard, depending on vehicle type and corresponding installation place, break off
the loudspeaker ears and attach loudspeaker with the provided springs respectively screws.
Fig. 3: Alternative installation SLX 210 Woofer
Installation Location: Door Installation (front/rear), rear installation, side view mirror area installation, dashboard
Surface installation: Fig. 4
•
Place the groundplate (U) on the installation place. Scribe the holes for mounting 2 x ø3,5mm and for the
cable ø5mm and drill them.
•
Fix the groundplate (U) with the enclosed screws (R) and sheet metal nuts (B).
•
Pull the cables through the relevant holes and place tweeter (J) into the groundplate (U).
•
Put the surface installation ring (O) over the tweeter (J) and fix it on the groundplate by twisting.
•
The tweeter can be moved in all directions now.
•
Connect the tweeter-cable with the crossover. The cable with the red marking is "+"
Fig. 4: Surface installation
O

Installing and Attaching the Tweeter

installation, and rear windshield deck installation
Fig. 5: Flush mount installation
9