Crevice Tool - Grundig VCC 4770 A Bedienungsanleitung

USAGE _ __________________________________
Dust brush
1 Grasp it from the dust brush area and pull it
backwards slowly.
–
A click will be heard, indicating that the
button on the body has seated into its slot.
2 Attach the end of the handle or the telescopic
tube to the inner side of the upholstery tool.
M
–
You can now start vacuum cleaning.
3 Pull the accessory to remove it when the process
is complete.
Crevice tool
1
If the accessory is on, press the button found on
the body and push it slightly to close.
– It clicks.
2
Attach the end of the handle or the telescopic
tube to the inner side of the upholstery tool.
M
– You can now start vacuum cleaning.
Warning
▪
The crevice tool must be adjusted to remain out-
side.
3
Pull the accessory to remove it when the process
is complete.
Warning
▪
Do not make cleaning by using the handle's
end part.
Switching off the vacuum cleaner
and parking feature
1
Switch off the appliance with the on/off button
and unplug it.
A
2
Press the cable winding button
cable inside the appliance.
Vertical parking feature
Attach the hook of the parquet/carpet brush
the parking groove located at the bottom part of
the appliance.
Horizontal parking feature
Attach the hook of the parquet/carpet brush
the parking groove located at the rear side of the
appliance.
O
to wind the
C
I
to
I
to
ENGLISH 21